Good Quality for Kitchen sink double bowl 9208 stainless steel to France Manufacturer
Good Quality for Kitchen sink double bowl 9208 stainless steel to France Manufacturer Detail:
Product: Double Bowl Kitchen Sink
Thickness:1.0mm(customized by customers)
Material:Stainless steel SUS304
Finish:Satin finish, resistant to corrosion
Accessories: chopping board, sink basket, kitchen liquid dispenser
Detail: With undercoated plus rubber pad for deadening sound.
OEM & ODM: Acceptable, send your drawing and specification
Packing: Carton packing/ pallet packing/ individual packing
Delivery date: within 20-30 days after pay for deposit
Product detail pictures:
Related Product Guide:
Why every website owner needs Google Analytics
We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for Good Quality for Kitchen sink double bowl 9208 stainless steel to France Manufacturer, The product will supply to all over the world, such as: UAE , Argentina , Portugal , Further, we are supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to offer our clients an effective range of products.
This video shows the construction procedure of a house from plinth beam level to Roof level
The Location of this house is in kerala, India
# Plan of column-35cmx21cm column
# Steel reinforcement works of column (pillers)
-6 no. of 12mm dia bars,
-8mm dia stirrup at 15cm c/c distance,
-Steel from below connected with new -steels and raised to required height.
# Extra steels provide for connection with lintel,Paper pieces folded for easy identification after deshuttering
# Setting out done – edges marked in cement sand paste
# Starter(shoe) for proper arrangement of column shutter
# Starter shutter removal
# Column shutter
-Made of woods or sheets
-Made according to the shape of column.
# Verticality check-Two wood pieces of eqaul dimension and rope with weight is used
When woods comes parallel- It is vertical
or using plumbbob.
# Shutter fixing using supports and nails
# Column concrete
-Water the inside of formwork
-cement slurry poured for good bondage
-concrete mix poured using bowls
-compacted using rod or vibrators
# Column formwork removal – after 24 hours
# Curing of column- atleast to 7 days. Preferably to 14 days
# Different types of Architrave fixings
-Wood door window frames, concrete door window frames etc
# Termite proof materials and wood primers for wood frames
# Steel primers for the steel of windows
# Cleaning of place of activity
# Mark the position were door frames comming
# Rope laid through the frames and connected to block for good fixing
# Verticality checked using plumbbob
# All doorframes fixed.
-To check level of doors – Levelling apparatus of small hose with water inside is used.
# Hold fasts are fixed for connection with masonry
# Masonry materials- Cement blocks , bricks, latterites etc.
# Size of Latterite used- 33cm x 19cm x 21cm
# Setting out, cleaning, watering
# Cement mortar applied
# Latterate laid with small gaps.
-cement mortar filled in these Joints using trowel
-applied on sides for good bondage
# Levelling staff and plumb bob used for levelling
# Masonry laid in stretcher bond pattern
# Window frames placing, levelling, fixing
# Space given for alamaras comming inside wall.
# Ventilation fixing
# Lintel with Thickness 15 cm
Steel-4 no. of 8mm diametre bars with stirrrups
# Steel in the column is taken out using chisel for connection with linel
# Lintel formwork made
-gaps between them are closed for leakage of slurry
# Berth slab is also in connection with lintel
# Concrete of lintel and berthslab
# Laterite above lintel
# Construction of Pargolas
# Small spaces leaved above for air movement
# Stair case
-drawings- some are straight steps and some are round steps.
# Positions marked according to plan -
# Cardboad pieces used for getting proper round shapes
# This is stair case starting from first floor so we connect stair case steel to roof steels of ground storey
# Concrete of staircase
Metals used in it -Three by four inch (3/4) or one by two inch(1/2) or a mix of them
# Jute bag laying for curing
curing 21 days
# Construction of retaining wall or Rcc walls
-for withstanding load comming on one side of building
# Roof beam and roof slab drawings
# Form work of roof beam done first, then roof slab
Material used-Jack and prob, woods, bamboo sticks, sheets etc
# Gap between shutter sheets closed to prevent the leakage of slurry.
# Steel placed above cover block
-Tied using binding wires (MSW)
# 20mm pipes laid
-for passage of electrical wires
# Fan hooks and boxes are laid
-Pipe openings given to below after covering with insulation tape
# Concrete mixing in the mixer
# Concrete comming in RMC (ReadyMix Concrete) vehicle
# Concrete placing, mechanical vibrator application
# Measured wood (10cm is thickness of slab) used for correct thickness
# Use of straight edge to struckoff excess concrete
# Wooden floats used to embed course aggregate into it firmly
# Use of trowel to smoothened it
# Small bunds made for curing
-Curing done to 21 days.
# Remaining works are plumbing, Electrical works, plastering, and other interior works.
Send your opinions and suggestions to my Email id email@example.com
For reading commentry of the video, visit http://smartconstructjj.blogspot.com
[http://www.indiamart.com/sipra-engineers-nashik/] Welcome to Sipra Engineers Pvt. Ltd. Manufacturer of Aluminium Diecasting We are an ISO certified company, established in 1978, at Nashik. We have spread our wings to Indian Subcontinent and we are awarded by ISQA -2009 awards Tata Motors Limited & Piaggio Vehicles Private Limited are some of our esteemed clients and we are backed by Specialized R& D unit & customized solution We offer a vast range of Automotive, Industrial & Control Diecasting. Automotive Diecasting offered by us are available at industry leading prices. Our Industrial Diecasting are in huge demand across the global markets. We offer Instrumentation & Control Diecasting that are well known for their durability. Along with that we offer Diecasting for Engines that are some of our best selling products We also provide Diecasting Components that are superior in performance.
By Camille from Puerto Rico - 2015.12.11 14:13
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Carlos from Finland - 2015.09.23 17:37