Best-Selling Kitchen sink single bowl 5040 stainless steel to Norwegian Factory

 Kitchen sink single bowl 5040 stainless steel to Norwegian Factory

Short Description:

Product Detail

Product Tags

Related Video

Feedback (2)

We emphasize progress and introduce new merchandise into the market each and every year for Sand Casting , Aluminum Die Casting , Stainless Steel Sink , Sincerely hope we are growing up together with our prospects all over the environment.
Best-Selling Kitchen sink single bowl 5040 stainless steel to Norwegian Factory Detail:

Product: Single Bowl Kitchen Sink

Thickness:1.0mm(customized by customers)

Material:Stainless steel SUS304

Finish:Satin finish, resistant to corrosion

Accessories: chopping board, sink basket, kitchen liquid dispenser

With undercoated plus rubber pad for deadening sound.

Certification: ISO9001

Warranty:3 Years

OEM & ODM: Acceptable, send your drawing and specification

Packing: Carton packing/ pallet packing/ individual packing

Delivery date: within 20-30 days after pay for deposit


Product detail pictures:

 Kitchen sink single bowl 5040 stainless steel to Norwegian Factory detail pictures

Related Product Guide:
Why every website owner needs Google Analytics

With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for Best-Selling Kitchen sink single bowl 5040 stainless steel to Norwegian Factory, The product will supply to all over the world, such as: Honduras , Munich , Estonia , The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products have been exported to more than 15 countries in the world and have been widely used by customers.

  • ***VISIT OUR SPONSORS*** | | |

    The first part in our series on how to install a Wash basin. This video cover the waste attachment or plug hole to the basin. If you need any more help just visit our website at


    Today I’m going to teach you how
    to install your basin, how to put the tap in, how to
    do the waste for that basin and basically get it all up and running. We’re going to
    be doing a few different stages on a few different videos. This is part one. So keep up and we’ll have
    a wicked time! Right this is the install itself. The basin is going in here
    in this corner. We’ve got our inch and a quarter waste and our hot and cold
    water supplies. The hot and cold water is turned off. But before I teach you how to
    hang the basin on the wall and get it connected all up like that
    we’ve got a special tap that’s connected to the waste. It’s called a pop-up waste. Now you’ve probably
    seen these alot in hotels and stuff like that. They have a little pin at the back of the tap
    that you can lift up and down, and that allows the waste to pop up and down. Firstly
    I’m going to teach you how to fit one of those onto this basin.
    This is the basin in question. We’ve got our waste hole here, our tap hole here
    and our overflow hole here. Now if we turn the basin round
    the waste hole comes through in this little channel here
    and pops out just inside this bit just there. When we look at our waste this is the top bit
    here. We’ve got a pop in insert there and that has a little hole
    that our rods are going to go through later. First
    let’s just have a look at about fitting this to the basin itself. These small holes should line up
    with these waste holes just here. So we pop that
    in there just like that. We get our lovely little tap
    bit. Make sure it’s got the supplied rubber washer on there
    Pop that through the hole just like that. Now for this
    next bit
    you must use some Plumber’s Mate because with that overflow bit going round the outside of the
    thread, any rubber washer that
    these people supply with it will never seal it up. So go down the shops and get yourself some
    Plumber’s Mate or if you’re not really good at using that, pop some silicon on there.
    but you’re going to have to wait about 24 hours for that to cure. Open up our Plumber’s Mate
    and scoop out a nice bit of Plumber’s Mate out of the tub
    and what you do is rub it in your hands until you’ve got a nice long sausage of it. Pop
    the waste through the hole and pop your sausage around the outside. So now we’ve got all our Plumber’s Mate on
    you get the other side rubber washer on here
    like that and then the opposite end has got a thread in here as well
    that creates a thread on there
    and do it up as tight as you can. This can be hard because Plumber’s Mate
    let’s it slip quite alot. So you might want something to hold it on with on the other side. Make sure it lines up with the tap
    hole down the bottom. Right, so we’ve got this bit in here that’s all tightened up nicely, This part
    which is the rod entry lines up with our tap hole entry.
    Go round the front
    we’ve got a little bit of Plumber’s Mate on here. Just rub that
    off when you’re finished. I always recommend doing this before you hang the basin on the wall because you
    can get round it easy and you’re not pulling on the
    fixings on the wall. Right, so that’s how you fit a
    waste and make it watertight for one of these
    little basins

    How the seams meet tightly:

    Water beading on the surface:

    It’s 100% Waterproof, like our Supreme Click Elite, but unlike that, there is no locking mechanism. Usually you don’t even need glue. It literally just lays in place, and then stays in place!

    Four Waterproof Flooring Terms that You Need to Know

    More info:

    Waterproof vs. Water Resistance:

    How Waterproof is Waterproof Flooring?

    0:05 – Pre-installation preparations
    1:09 – Install right up against the wall (no gap)
    1:26 – The “Loose Lay”
    1:50 – Last piece in a row (pay attention to the Factory Edge)
    2:50 – Staggering end joints
    4:25 – The locked in floor
    4:45 – Adjusting an already placed plank
    5:46 – Difference from other floating floors

    6:02 – When you need adhesive
    6:25 – Applying the adhesive
    7:20 – Laying the planks
    7:57 – Planks are anchored
    9:15 – Adhesive for remaining walls after first row is down
    9:47 – Adhesive bands through the room (not required in Loose Lay, but will not hurt)
    10:45 – Should one work in segments?
    11:28 – Very basic wrap up

    For Norman, Angle to Angle Vinyl Installations – General Tips

    Follow us!

    Our blog –
    Facebook –
    Pinterest –
    Twitter –!/FTYHFlooring
    Google+ –

    Video thrown together by W. David Lichty at

    Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
    5 Stars By Edward from Accra - 2015.05.15 10:52
    In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.
    5 Stars By Ivy from Toronto - 2015.11.04 10:32

    Send your message to us:

    • * CAPTCHA: Please select the Tree

    Related Products

    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !